Channel with 20 mm slot, horizontal edges, no siphoned direct outlet pipe ø 63 mm ideal for the support of the upper waterproof membrane and tiles
(See DWG 0451-0452-0453-0454 – page 35 of the catalogue)
Installation
example
Inoxsystem® Line 0450
Inoxsystem® Drainage system entirely made of grade 304 stainless steel, grade 316 on request, composed of: hidden slot channel with with 20 slot and horizontal edges (art. C1BDVL) which can be installed under the floor, sheet thickness 2 mm, width 60 mm, fully inspectable with built-in slope and internal radii to improve cleaning performance, mounting brackets to fix the channel into the concrete, reinforcement spacers every 250 mm, connection flanges (art. FLC) provided with silicone and fixing screws for easy transport, vertical direct outlet (art. SDV) or horizontal direct outlet (art. SDL) Ø 63.
Spec.
Render 3d
Entirely made of stainless steel AISI 304 (or 316 upon request), with a thickness of 2mm,, they are ideal especially for locker rooms, swimming pools, showers, tarraces, squares, etc..
This type of channel has been studied for the bonding of the waterproof membrane on the upper horizontal edges of the channel, with subsequent laying of the floor. Will be the customer, then, decide the width of the slot by adjusting the laying of the upper tiles.
The center slot of the channel is standard 20 mm, edge each 50 mm and channel drainage body of 65 mm technically designed to be fully inspected at sight (art. Inoxsystem® “C2BR”)
The channel can be complete with direct outlet pipe of Ø 63 mm (not-siphoned). Uppon request it’s possible to have an inspection floor drain with or without odor trap/water trap.
Outlet can be vertical (art. Inoxsystem® “SDV”) or horizontal (art. Inoxsystem® “SDL”) and can be positioned at the center, at the head or in a point of the channel defined by the customer.
Thanks to the groups of connection flanges every 3 or 6 meters, depending on the transport needs, the channel can be produced custom with various lengths (art. Inoxsystem® “FLC”)
We can also provide grafts for flushing of channel with diffusers ½” (art. Inoxsystem® “IL”)
Important: All stainless steel Inoxsystem® products can be made custom, with designed drawings in collaboration with our technicians, able to satisfy the widest range of installation requirements.